Traffic Management

Traffic Management


  1. I am using JSP’s speed bumps. What signage do I need to use and what speed is appropriate?

    It is the responsibility of the Landowner/Leaseholder to place appropriate signage to indicate the speed limit at which the...

  2. Do you have any general guidelines for setting up roadworks?

    This information can be found on the ‘Department of Transport’s website, Safety at street works and road works document’...

  3. Before you start - General

    Is high visibility clothing being worn by everyone on the site? Are all signs, barriers, cones and lighting correctly placed?Are...

  4. Before you start - Pedestrians

    Are pedestrians given protected routes which are wide enough? Are pedestrian routes clearly indicated?If the footway is closed, is there...

  5. Before you start - Traffic

    Is a type of traffic control right for work, traffic and speed?Have any misleading permanent signs and road markings...

  6. When work is in progress

    Does signing and guarding meet changing conditions?Are signs, cones and lamps kept clean?Can traffic control arrangements be improved to...

  7. When work is finished

    Have all signs, cones, barriers, and lamps been removed?Have any covered permanent signs been restored?Have the authorities been told...

  8. How we test our cones at JSP

    Cone Compliance Product Testing Our compliant cones are independently lab tested and batch tested under our ISO9001 quality system to...

  9. Working with MIRA: Wind Tunnel Testing

    JSP has worked with MIRA, ‘the UK’s only full scale aerodynamic wind tunnel’, to test and further develop our road...

  10. I have hired a skip which is going to be at the side of the road, the hiring company is trying to sell me road lamps as well. Do I need those?

    If you are putting an obstruction in the roadway then it has to be marked. You should really be...

  11. I have got some lamps and cone brackets, what is the correct way to put these on the cones I have?

    The most important thing to consider is not to reduce or cover the reflective part of the road cone....

  12. How long do the batteries in your lamps last?

    That will depend on several factors including natural light levels and temperature. JSP offer lamps with or without photocells,...

  13. Which of your barriers do I need to use around road works?

    If you are using a barrier system on the highway, it must have reflective emblem fitted, so that vehicle...

  14. The barriers don't look like they will be able to stop a car hitting the people working in the road

    That is correct, the barriers are a visual barrier, designed to indicate the presence of the road works to...

  15. I don't have enough planks to set up the Dominator barrier system, can I just put planks in the top?

    No. Both planks are needed for the correct system. The lower panel is needed for those that are partially...

  16. I have put cones out, in the pattern as defined in the "Safety at Street Works" book, but an inspector has told me I haven't used the right cones.

    The " Safety at Street Works " book and the law require that the cones have reflective sleeves that...

  17. So if the sleeves on my cones are damaged, can I get some replacements?

    Yes, JSP can supply replacement sleeves, just make sure that you know which cone that you have.

  18. When work is suspended

    Will checks be made on signing, lighting and guarding?Has the arrangement been changed to reflect conditions?

Can’t find what you’re looking for?

Contact Support