With industrial respiratory masks often in high demand, it’s essential to maximise the lifespan of your reusable half-mask by keeping it clean and properly maintained.

Maintaining your PPE ensures better hygiene, helps reduce costs, and supports sustainability. By following the correct cleaning steps, you can get more use from your Force®8 Half Mask with PressToCheck™ filters. JSP has created a helpful video and poster to guide users through the cleaning process and improve product longevity.

Use it – Clean it – Use it again!

To properly care for your Force®8 Half Mask with PressToCheck™ filters, follow these simple steps:

1. Disassemble
Remove the filters from your Force®8 Half Mask. If they appear blocked, discard them and replace with a new pair after cleaning. Then, remove the exhalation valve cover to detach the harness and diaphragm from the mask.

2. Clean
With the mask fully disassembled, wash the main body, exhalation valve, and diaphragm in warm soapy water. Rinse thoroughly and dry each part using a lint-free cloth.

3. Reassemble
Once all components are clean and dry, reassemble the mask:

Re-insert the diaphragm by threading it through the front of the mask until it’s correctly seated.

Fit the harness over the front of the mask, ensuring it’s the right way up.

Lock everything in place using the valve cover. Align and twist the valve cover to secure it.

Re-attach your original filters, or fit a new set if needed.

Key points:

• Regular cleaning extends the mask’s life and maintains hygiene.
• Always disassemble the mask before cleaning.
• Use soapy water and a lint-free cloth for cleaning.
• Ensure parts are fully dry before reassembly.
• Replace filters if blocked or visibly worn.